Skip to main content
SUWANVARA LAWFIRM
Suwanvara Law Firm Co., Ltd.
SUWANVARA LAWFIRM
SUWANVARA LAWFIRM
Suwanvara Law Firm Co., Ltd.
Business Law

Lots of Chats but Few Buyers: Measuring Marketing by Qualified Customers and Profit, Not Message Count

How to separate enquiries, qualified leads, people who received a quote and paying customers, track source, cost, profit and time-to-close per channel, with a labelled hypothetical table comparing three channels and notes on customer data (PDPA) and truthful advertising.

Suwanvara Law Firm— Business Law TeamNovember 21, 202614 min read
Lots of Chats but Few Buyers: Measuring Marketing by Qualified Customers and Profit, Not Message Count

The core answer

The number of chats shows how much attention an ad attracted, not how much money the business made. What works is to split everyone who contacts you into stages: enquiry, qualified lead, received a quote, paying customer, and repeat or retained customer. Write a clear definition for each stage and keep it fixed between periods. Then record where each person came from and calculate cost, revenue, gross profit and days-to-close per source. The channel with the most chats is often not the one with the most profit. The hypothetical example in section 6 shows this.

Rule of thumb. Every figure must come from real records: do not round up, drop unattractive periods or change definitions midway to make results look better. Names, phone numbers and LINE IDs of enquirers are personal data and need a stated purpose. Section 9 summarises this in plain words.

Our practical view. Start with one table and five definitions, and use them unchanged for at least three months before raising or cutting ad spend. The criteria and figures in this guide are examples; adjust them to your business.

This guide is about measuring which channel brings good customers. For profit per sale see cost per sale before starting a company, for sales targets and commission see sales KPI and commission design, and for customers who leave see churn analysis.

Who should read which part

Your stageWhat to read
Before deciding (about to buy ads or hire an agency)Sections 2 to 4 to set definitions and tracking before spending, and section 9 on customer data and advertising
During operation (already running ads)Section 5 for cost and profit per channel, section 6 for the example table, section 8 for tools
When the numbers miss the plan (many chats, sales not rising)Section 1 to find where people drop out, sections 5 and 6 to compare channels, section 7 for honest reporting

1. Why does message count mislead?

A chat can be a ready buyer, someone asking the price out of curiosity, a competitor checking prices, or someone outside your service area. The count treats them all the same. Three problems are common.

  • Wrong audience. Sensational wording or very low prices draw many chats from people who will not buy.
  • Slow or leaky follow-up. Good chats arrive but replies are slow, quotes are not sent or nobody follows up.
  • Price does not cover cost. Sales happen but gross profit is too low to cover ads and the time spent answering chats.

To find the leak, count the people at each stage and look at the share who move to the next one. If many enquirers fail the criteria, the ad message or target group is the problem. If they qualify but get no quote, the problem is response. If they get a quote but do not pay, look at price, offer or trust.

2. What are the stages and how do I define each?

Write one sentence per stage so different people count the same way, and freeze the definitions for at least a quarter.

StageExample definitionWhat to record
1. EnquiryA person who first sends a message, calls or fills in a form. Count one per enquiry episode; do not double-count the same person on the same matterDate, source, contact channel
2. Qualified leadAn enquirer who answered the screening questions and meets the written criteria (see section 3)Date qualified, each answer
3. Quote or offer receivedA qualified lead who has been sent a written quote or offerDate sent, value offered
4. Paid customerA person who has paid as agreed (decide whether a deposit or full payment counts, pick one and use it throughout)Date paid, revenue, job cost
5. Repeat or retainedA customer who buys again or renews within a set period, for example 12 monthsDate of repeat, next revenue

Count a "paying customer" when money arrives under the agreed terms, not when the customer merely says yes. If there is a refund or cancellation, record it as a separate adjustment instead of deleting the original entry.

3. How do I set the qualification criteria?

Good criteria are a short set of questions asked of everyone and answerable in the first chat or call. Example for a service business:

  • In the area or type of work we accept
  • States a rough budget or acceptable price range
  • Has a timeframe (within how many days or months)
  • Is the decision-maker or can say who is
  • The problem described matches what we do

Decide how many answers are needed to count as qualified and write it where everyone can see it. A person who does not qualify is not worthless and may become a customer later. Record the reason, because these reasons show where the ads attract the wrong people. Ask only what you need to screen; do not collect personal details unrelated to the sale.

4. How do I track where customers come from?

Every person needs one "source" value from the first stage, and it must follow them to the paid stage.

  • Source tags in links (UTM). Put source, medium and campaign labels in each ad link so the website or system records where the click came from.
  • Separate links or greetings per channel. For example different LINE links or QR codes for ads, the website and flyers.
  • Ask directly. "How did you hear about us?" is one of the first questions, because many people see an ad and search your name later, so automatic tags are incomplete. Use both and compare.
  • Use a fixed list of values. For example social ads, web search, referral from existing customer, partner. Do not let each person type their own wording.
  • Referrals. Count them as their own source and record the cost of thanking the referrer, if any.

If you cannot tell, record "unknown". Do not guess the likely channel, because that makes one channel look better than it is.

5. How do I calculate cost, revenue, profit and time-to-close?

Once you have counts per stage and the source, calculate the following per source.

MeasureHow to calculateWhat it tells you
Cost per enquiryAd spend of the source divided by enquiriesHow cheap chats are, not how worthwhile
Cost per qualified leadAd spend divided by qualified leadsHow cheap on-target people are
Close ratePaying customers divided by people who got a quoteQuality of the offer and follow-up
Cost per paying customerAd spend divided by paying customersThe price of winning one customer
Revenue per sourceSum of revenue from paying customers of that sourceSize of the channel
Gross profit per sourceRevenue minus direct cost of the work soldMoney left before ad spend
Profit after ad spendGross profit minus ad spend and agency fees for that sourceWhat decides whether the channel pays
Time-to-closeDays from enquiry to payment (use the median per source)How fast cash comes back

Three cautions. First, if customers take a long time to decide, group by enquiry date rather than payment date so a new channel does not look worse than it is. Second, have the company's accountant confirm what counts as direct cost and how shared costs are allocated; we give no tax or bookkeeping opinion. Third, the time of the person answering chats is a real cost, so record hours if a channel takes much effort but closes little.

6. Hypothetical example: the channel with the most chats is not the most profitable

This is not a real case of any business. All figures are illustrative baht amounts to show the method. Suppose a service company with jobs averaging tens of thousands of baht collects one quarter of data across three channels.

Item (illustrative figures)A Social adsB Web searchC Existing-customer referrals
Ad spend or thank-you cost (baht)30,00020,0005,000
Enquiries3006025
Qualified leads453620
Quotes sent302415
Paying customers687
Total revenue (baht)180,000320,000245,000
Total gross profit (baht)54,000128,00098,000
Cost per enquiry (baht)100333200
Cost per paying customer (baht)5,0002,500about 714
Profit after ad spend (baht)24,000108,00093,000
Median time-to-close (days)211410

Reading the hypothetical table: channel A brings the most chats and the lowest cost per chat, but the fewest paying customers, lower gross profit per customer and the lowest profit after ad spend. Channel B brings far fewer chats, but most of them qualify, more close, and profit after ad spend is highest. Channel C is small but worthwhile and closes fastest.

The decisions that follow should be experiments: tighten the ad message of A to attract the right people, raise the budget of B in small steps and check whether cost per paying customer holds, and find ways to get more referrals from existing customers. Do not decide on one quarter where paying customers number only a handful, because the figures swing widely. This example also leaves out the time spent answering chats and other shared costs.

7. How do I report honestly?

Marketing reports are used to set budgets, pay agencies and explain results to partners, so they must be reliable.

  • Keep definitions fixed. If you must change one (for example the qualification criteria), state the date and either recalculate past periods with the new definition or show both side by side.
  • Use only recorded figures. Do not invent, round up or guess the source of unknown cases, and do not drop unattractive entries.
  • Show sample size and period. Figures based on a handful of paying customers should be flagged as thin data.
  • Separate facts from forecasts. Put what happened in one part and projections in another, and state the assumptions.
  • Check the agency. If an agency reports clicks or chats, ask it to report qualified leads and paying customers too, and compare with your own records.
  • Do not embellish results in public. Figures used in advertising or to persuade others need supporting evidence (see section 9).

8. What simple tools work?

You do not need expensive software at first. One spreadsheet, or a CRM with these fields, is enough.

Column or fieldExample valueNote
Customer codeL-0001Use a code instead of the name in reports
Enquiry date2026-11-03One format throughout
SourceSocial adsPick from a fixed list
Campaign tag (UTM)autumn_offer_aIf available
Stage statusQualified leadValues from the section 2 definitions
Date reached each stagequalified, quote sent, paidUsed to compute time-to-close
Value offered and actual revenue35,000 / 35,000Two separate fields
Direct job cost22,000Have the accountant confirm how it is counted
Reason for not qualifying or not buyingBudget too lowUsed to adjust ads
OwnerSalesperson nameFor follow-up

Add a summary sheet that pulls the section 5 measures per source. If volume grows, move to a CRM using the same fields. This data contains names and contact details, so set access as described in section 9.

9. How do I handle customer data and advertising claims properly?

Names, phone numbers, LINE IDs and chat history are personal data. When a business collects and uses them, the principles of the Personal Data Protection Act (PDPA) apply, in plain words as follows. Information as at 21 November 2026; check the Personal Data Protection Committee Office website for current details and guidance.

  • Purpose. Collect only what you need for the stated reason, such as answering the enquiry, preparing a quote or following up. Do not collect everything just in case.
  • Tell people. Say what you collect, why, for how long, and whom to contact. This can go in the automatic greeting, the web form or a privacy page that is linked.
  • Consent for marketing. Using data to answer the question someone asked is one thing; sending promotions or building ad audiences from it is another. For the latter you will usually need clear consent, an easy way to refuse or withdraw it, and a record of when it was given.
  • Retention. Decide in advance how long you keep enquirers who did not buy, and delete or anonymise after that.
  • Who can access. Limit to people who need it. Do not share files with names and numbers in wide group chats. Use passwords and permissions.
  • Agencies and vendors that handle the data. If an agency, CRM provider or messaging vendor can reach customer data, have a contract or agreement stating the permitted purpose, security duties, how fast a data leak must be reported and that data is returned or deleted when the contract ends.
  • Rights of data owners. People may ask to access, correct or delete their data. Have a channel for requests and a person responsible.

Advertising. Claims must be truthful: do not claim results you cannot support, do not use invented reviews or figures, and do not hide important conditions of an offer. Overstated claims may bring the wrong people, leave them disappointed afterwards and may create legal problems, especially for products or services with specific rules. See the guidance of the Office of the Consumer Protection Board and check the rules that apply to your business before publishing. For customer data in acquisitions and AI tools see PDPA and the customer database when buying a business and company AI policy and customer data.

10. Checklist to start measuring within a month

  • Write the five stage definitions on one page and make sure everyone involved agrees
  • Write the qualification criteria and one set of screening questions used for everyone
  • Fix the list of sources and add UTM tags or separate links to every ad set
  • Add "how did you hear about us" to the first chat or call
  • Build the section 8 table and name the person who fills it in
  • Agree with your accountant how direct cost is counted
  • Add a data collection notice, ask for consent before marketing messages and set a retention period
  • Check the agency contract for customer-data terms and required reports
  • Set a monthly review date, calculate per section 5 and keep each month's report for comparison
  • Before changing budgets, look at at least a quarter and enough paying customers

Common misunderstandings

MisunderstandingCorrection
Lots of chats means the ads workChats show interest, not sales or profit. Look at paying customers and profit after ad spend per channel
The channel with the lowest cost per chat is bestCheap chats can come with people who do not buy. Compare cost per paying customer and profit
I can change the qualification definition every month as I see fitFrequent changes make periods incomparable and can make results look better without being better. If you must change it, state the date and recalculate past periods
For customers with unknown source I can put the likely channelRecord "unknown". Guessing makes one channel look better than it is
Once I have someone's number and LINE ID I can send promotions any timeData collected to answer a question does not open every marketing use. Promotional messages usually need notice and consent
If the agency holds all the data, the business is not responsibleThe business must still make sure the use has a purpose and a contract governs it. Do not leave data with an agency without an agreement
I can use the best numbers in ads or to pitch partnersDisclosed figures must be true and supported. Polished figures can create liability toward people who rely on them

Limits of this guide. It explains general measurement principles and cautions about data and advertising. It is not tax, accounting or platform-specific advice. Businesses with specific rules, such as food, drugs, cosmetics, finance or health services, face further advertising restrictions, and every figure in the examples is hypothetical.

Further reading

Good marketing measurement counts paying customers and profit per channel, with fixed definitions, figures that are never embellished, and customer data collected for a stated purpose.

We help design the sales process and the way customer data is collected: drafting stage definitions, a source-tracking form, data collection notices and consent wording, and data terms for agency contracts. We do not judge ad performance by message count, we are not accountants or tax advisers, we do not run your ad accounts, and we cannot promise sales or business results. Fees depend on the stage of the matter and the work involved. Send us the documents first, and we will give you the scope of work and fees in writing before we start. Call +66 92 254 2045 or send us the details. See also business plan and PDPA compliance.


This guide is published by Suwanvara Law Firm — a Khon Kaen law firm established in 1986. General information only, not legal advice on a specific matter.

Frequently asked questions

Many people message us but few buy. What should I measure instead of message count?+

Count the people at each stage of the customer path: enquiry, qualified lead, quote received and paying customer. Then look at cost per paying customer, revenue and gross profit per channel, and days to close. The channel that brings the most chats may not be the most profitable.

What is a qualified lead and who decides?+

A qualified lead is an enquirer who answers the screening questions and meets criteria the business wrote down in advance, such as being in the service area, having a rough budget and timeline, and being the decision-maker. The owner or sales manager sets the criteria, and they should be written so anyone can apply them the same way.

How can I track where customers come from without expensive software?+

Use one spreadsheet with a source column, put source tags (UTM) in ad links, and ask every customer how they heard of you in the first chat. Record the same values every time and record the date each person reaches each stage so you can calculate time-to-close.

May I keep names, phone numbers and LINE IDs of people who message us for later marketing?+

It depends on the purpose you told them and the basis for collecting. Tell people what you collect, why, and for how long, and ask for consent before sending marketing messages that go beyond answering what they asked. Limit who can access the data and have a contract with any agency or vendor that handles it.

How do I report marketing results to management or investors without misleading them?+

Use real figures from your records, keep stage definitions the same every period, state the period and sample size, and say what could not be counted. Do not change definitions or cut periods to improve the numbers, and do not advertise results you cannot support.

Lawyer-client handshake symbolizing trust at Suwanvara Law Firm

Ready to hear your story

Get an initial consultation with one of our experienced attorneys.