Skip to main content
SUWANVARA LAWFIRM
Suwanvara Law Firm Co., Ltd.
SUWANVARA LAWFIRM
SUWANVARA LAWFIRM
Suwanvara Law Firm Co., Ltd.
Business Law

Sending Many Quotations but Closing Few: How to Manage the Sales Pipeline and Forecast Sales

An owner's guide for Thai SMEs: define pipeline stages by evidence, qualify decision-maker, budget and timing, handle stale deals and loss reasons, separate opportunity value, expected close and expected cash, and see where the law helps.

Suwanvara Law Firm— Business Law TeamNovember 12, 202616 min read
Sending Many Quotations but Closing Few: How to Manage the Sales Pipeline and Forecast Sales

The core answer

Sending many quotations but closing few usually does not mean the sales team is not working hard. It means the pipeline is full of deals that were never real opportunities. Quotations went to people with no buying authority, no budget or no deadline, and the deals then sat in the pipeline for months, so the forecast is always higher than reality.

There are four fixes. One, define what evidence is needed to move a deal to the next stage, not whether the salesperson feels good about it. Two, qualify the decision-maker, budget and timing before preparing a quotation. Three, remove stale deals by rule and record the reason for every loss. Four, split the numbers into three layers: opportunity value, expected close (weighted) and expected cash, because the same deal can close this month while the money arrives four months later under its payment terms.

The law helps where the quotation becomes a contract that binds you: the validity period, terms that conflict with the PO, deposits, the customer's signing authority and credit terms. Every figure labelled "hypothetical example" only illustrates the method and must be adapted to the actual business.

This guide uses the stage-and-probability idea common to general CRM pipeline models as a basis only. It does not recommend any tool or system; a spreadsheet works. Conflicting quotation and PO terms are covered in detail in conflicting quotation and PO terms and are not repeated here.

1. Why does a large number of quotations not mean strong sales?

The number of quotations measures activity, not results. Common symptoms in a B2B business selling equipment or services:

  • A quotation goes to everyone who asks for a price, even when it is only used to negotiate with the incumbent supplier.
  • The contact is a purchasing officer or engineer gathering information, not the person who approves the money.
  • A deal quoted 60 days ago still says "waiting for the customer" and still counts as close to closing.
  • The salesperson says "the customer is very interested" but there is no date for the next meeting.

Hypothetical example: over 12 months, 60 quotations were sent and 9 won, a win rate of 15 percent. If 30 of the quotations never involved anyone who approves budget, the problem is not that the quotations were unattractive; those 30 should never have counted as opportunities.

Figures to read alongside the number of quotations:

MeasureHow to calculateWhat it tells you
Overall win rateDeals won ÷ quotations sentQuality of qualification overall
Stage-to-stage conversionDeals that passed this stage ÷ deals that entered itThe stage that leaks most
Average age of won dealsDays from start to closeUsed to decide which deals are abnormally stale
Average value of won dealsTotal won ÷ number of deals wonUsed to judge how large the pipeline must be

2. How should pipeline stages be defined, and what evidence is needed to move up a stage?

The principle is that a stage describes what the customer has done, not what we have done. "Quotation sent" is our activity. "The customer scheduled budget approval for the 15th" is evidence from the customer's side. Hypothetical example for a packaging machinery seller:

StageWhat must be true to enter this stageEvidence to recordProbability (hypothetical)
1. ProspectA problem or need we can solve, and a real conversation with usContact name, the problem stated, date of the conversation5 percent
2. QualifiedWe know the decision-maker, the rough budget and the timeframe (section 3)Approver's name and title, budget range, date they want it running15 percent
3. Solution and price proposedThe customer has confirmed the technical requirements or we have surveyed the site, and the quotation has gone to the decision-makerQuotation, meeting notes, confirmed requirements30 percent
4. Negotiation and termsThe decision-maker is involved, the customer is negotiating price, payment terms or delivery, and a competitor can be namedPoints negotiated, who the competitor is, decision date60 percent
5. Awaiting purchase documentThe customer has said in writing that they chose us and is issuing a PO or signing a contractEmail or letter of confirmation, draft PO85 percent
6. WonA PO or contract signed by an authorised person has been received, with terms matching what we offered or later agreedPO, contract, company affidavit100 percent
7. Lost or cancelledThe customer declined, chose another supplier, or has not responded beyond the stale-deal rule (section 4)Loss reason (section 4)0

Points on using it:

  • Deals can move backwards if the evidence disappears, for example the approver who was scheduled changes role. The deal returns to the last stage whose evidence is still complete.
  • Probabilities must come from your own data. The figures above are hypothetical. Even where a general CRM tool supplies defaults, they are not your business's numbers (section 6).
  • One main piece of evidence per stage. Do not let salespeople tick a stage with nothing attached. The team lead spot-checks once a month.
  • Do not create too many stages. Five to seven are enough for most SMEs. An extra stage needs evidence genuinely different from the stage before it.

3. How do you qualify the decision-maker, budget and timing before sending a quotation?

Before spending time costing a quotation, run these three checks. If they cannot be answered, the deal is still at stage 1 and should not enter stage 3.

TopicQuestion to ask the customerWhat counts as a pass
Decision-makerWho approves this purchase? Who else must agree? What is the approval process?You have a name and title, and access to that person or to someone with a direct line
BudgetWhat is the budget range for this job? Is it already approved or must it be requested? Capital or operating budget?The customer gives a range or confirms a budget exists; if it must be requested, you know when
TimingWhen do you need it running? What happens if it is later?There is a date or an event that forces a decision, such as an old machine failing often or a production order waiting

Additional points for B2B:

  • Ask about competitors and alternatives, including "do not buy at all", which is often the biggest competitor.
  • Ask about the payment terms the customer expects from the start, because they affect cash (section 6) and our credit policy.
  • Ask what documents the customer needs for approval, such as three quotations or a company certificate. If the customer asks for a quotation "to make up three", ask whether one supplier is already the intended choice.
  • Decide whether a detailed quotation is worth the time. A deal that has not been qualified may get only an indicative price range, clearly stated not to be a binding offer.

Choosing customer segments that fit the business from the start makes the pipeline better. See choosing B2B customer segments.

4. What is a stale deal, and how do you record why deals are lost?

A stale deal is one with no movement from the customer's side for longer than is normal for your business. Stale deals inflate the forecast and waste the team's time chasing people who never intended to buy.

A workable rule (hypothetical, adjust to your own sales cycle):

  1. Find the average age of won deals over the past period, for example 70 days.
  2. Set a warning threshold at about 1.5 times that. A deal in the same stage beyond it must have a next meeting date confirmed by the customer.
  3. Set a closing threshold at about 2 times, or when there is no reply after three follow-ups over three channels. Move the deal to "no response" and remove it from the forecast.
  4. A removed deal can come back, re-entering at the stage its current evidence supports, not its old stage.

Record the loss reason on every lost deal from a pick-list, so the reasons can be counted, with an open-text field only for important cases.

Loss reasonExample meaningWhat can be adjusted
PriceA competitor was cheaper, or over budgetCheck budget qualification, change the shape of the offer, see discounting to boost sales before cutting any price
Payment termsThe customer wanted longer credit than we allowReview the credit policy (customer credit policy)
Features or specificationThe product did not fit the needAdjust the product, or stop offering it to this segment
Chose incumbent or competitorAn established supplier was already in placeCheck whether competitors were qualified at stage 2
No decisionThe project was postponed or cancelledCheck whether a real reason to decide existed at stage 2
No responseUnreachable beyond the closing thresholdCheck whether the quotation went to the decision-maker
Lead timeWe could not deliver in timeReview capacity or stock

Every month, count loss reasons by number and by value. If one reason accounts for more than a third of lost deals, fix that first rather than telling salespeople to "chase harder".

5. How do opportunity value, expected close and expected cash differ?

These three figures answer different questions and are often mixed up, so owners plan cash wrongly.

FigureHow to calculateQuestion it answers
Opportunity value (pipeline value)Sum of the value of all open dealsHow big is the pipeline? Are there enough deals?
Expected close (weighted)Deal value × stage probabilityHow many purchase orders do we expect this month or quarter?
Expected cashThe weighted amount placed in the month the money actually arrives, by deposit, instalments and credit termsWhich months have enough cash for suppliers, salaries and rent?

The weighted figure is an average over many deals, not a prediction of any single deal. One large deal that is lost can pull actual results far below the forecast. If the pipeline holds fewer than about 20 deals, look at a range (best, middle, worst) rather than one number.

6. A hypothetical example: if the deal closes this month, which month does the cash arrive?

Hypothetical example, a packaging machinery seller, pipeline summary at the start of November. All amounts exclude VAT.

DealValue (baht)StageProbabilityWeighted (baht)Expected closePayment terms
A Automatic packing machine1,200,000460 percent720,000November30 percent deposit at PO, the rest 30 days after delivery; delivery 45 days after PO
B Conveyor and installation800,000330 percent240,000December60 days' credit after delivery; delivery 30 days after PO
C Spare parts and service500,000215 percent75,000JanuaryCash on delivery
D Plant expansion project2,000,0003 (stale)30 percent600,000Not statedNot agreed
Total4,500,0001,635,000

Deal D was quoted 90 days ago, the decision-maker has not joined any meeting and there is no next meeting date. It is past the closing threshold in section 4, so it is removed from the forecast (probability 0). The weighted total of deals A to C is 720,000 + 240,000 + 75,000 = 1,035,000 baht.

Expected cash table (hypothetical example, calculated from the weighted amounts of deals A to C in the table above):

MonthSourceExpected cash in (baht)
NovemberDeposit on deal A: 1,200,000 × 30 percent × 60 percent216,000
DecemberNone0
JanuaryNone0
FebruaryBalance of deal A (840,000 × 60 percent = 504,000) and deal C (500,000 × 15 percent = 75,000)579,000
MarchDeal B: closes in December, delivered in January, 60 days' credit (800,000 × 30 percent)240,000
Total1,035,000

What the table shows:

  • Expected close is 1,035,000 baht, yet only 216,000 baht of cash is expected in the first three months. If you plan raw-material purchases or machine purchases from suppliers on the closing figure, you will run short of cash without noticing.
  • A better deposit brings cash in sooner and reduces the risk that the customer cancels. Payment terms are part of the sales strategy, not something accounting sorts out afterwards.
  • If the customer on deal B asks to extend credit from 60 to 90 days, the cash moves from March to April. Decide on credit with numbers like these; see customer credit policy.
  • The stage probabilities used are hypothetical. If your data shows deals that were once at stage 3 closed only 20 percent of the time, use 20 percent and the totals will change.

How to calculate probability from real data: take every deal that reached stage 3 in the past 12 months and count how many closed. With fewer than 15 to 20 deals the result still swings widely, so use a broad estimate and keep watching.

7. How should management run a pipeline meeting, and how does it relate to sales pay?

Hold the pipeline meeting weekly, for no more than 30 minutes, and focus on changes rather than reading every deal.

  1. Deals that reached stage 4 or above this week, and the evidence held
  2. Deals that moved backwards or were lost, with the reason chosen from the list
  3. Deals past the warning threshold, who will do what, and by which date
  4. High-value deals needing management help, such as asking for a meeting with the decision-maker

Avoid tying pipeline numbers directly to bonuses, because salespeople are then motivated to add deals or inflate stages. Tie pay to verifiable outcomes such as value of POs received and cash actually collected. See sales KPI and commission design.

8. How far does a quotation bind us, and what terms should it contain?

A quotation is not only a sales tool; it can be a legal offer. Points to know:

  • Validity period. Section 354 of the Civil and Commercial Code provides that an offer to contract which states a period for acceptance cannot be withdrawn within that period. If our quotation amounts to an offer and says "price valid for 90 days", we cannot withdraw within that period even if steel prices or exchange rates move. Some quotations may be only an invitation for the customer to make an offer, so the actual wording and circumstances matter. Choose the validity period as short as your costs and stock allow.
  • Late acceptance. Under section 359, first paragraph, an acceptance that arrives late is treated as a new offer. So we can choose whether to accept, and we should not stay silent; reply in writing.
  • Acceptance with changes. Under section 359, second paragraph, an acceptance with additions, limitations or modifications is treated as a rejection and a new offer at the same time. A PO that changes the price, delivery date, penalties or payment terms is therefore not yet a contract on the terms we offered. The problem and how to check it are in conflicting quotation and PO terms.

Terms a standard quotation should carry:

TopicWhat to write
ValidityA clear end date, and what applies after it
ScopeWhat is and is not included, such as installation, training, freight, warranty
Price and taxWhether VAT is included, and price adjustment if raw materials or exchange rates move sharply
PaymentDeposit, instalments, and the date from which credit terms run
DeliveryCounted from receipt of the PO and deposit, not from the date of the quotation
Our termsState that our terms of sale apply, and that a PO with different terms must be confirmed in writing
SignatoryThe authorised person on our side who signs the quotation

9. How can deposits, signing authority and credit terms be protected under the law?

Deposits. Section 377 of the Civil and Commercial Code treats a deposit as evidence that a contract exists and as security that it will be performed. Section 378 provides that, unless agreed otherwise, a deposit is returned or applied as part payment when the debt is paid; it is forfeited if the party who paid it fails to perform or the contract is terminated through that party's fault; and it is returned if the party who received it fails to perform. In practice:

  • State clearly whether a sum is a deposit or an advance instalment, because the result differs if the customer cancels.
  • Set out the forfeiture or return conditions in the quotation and contract rather than relying on the general rule.
  • Before forfeiting, check the facts case by case, such as who breached and whether we were ready to deliver. Do not forfeit automatically.

The customer's signing authority. Section 70 of the Civil and Commercial Code provides that a juristic person must have representatives as the law, its regulations or its constitutive instrument provide, and that its intentions are expressed through its representatives. A PO or contract signed by a purchasing manager may therefore not bind the company if that person is not an authorised signatory under the affidavit. Obtain a recent company affidavit before closing a high-value deal, and check the directors, the signing conditions and the seal. If the signatory is not a director, ask for a power of attorney. Company data can be checked with the Department of Business Development.

Credit terms and payment conditions. Agree them before delivery and write them identically in the quotation, PO and invoice. Start new customers with short credit and a low limit, as explained in customer credit policy, and do not count a deal as closed until credit is approved.

RiskWhere the law or the documents help
Price changes while waiting for the customerA short validity period with a price-adjustment clause (section 354)
PO changes the termsReply in writing before work starts (section 359)
Customer cancels after we order materialsA deposit clearly identified as a deposit (sections 377 and 378)
Signatory lacks authorityCheck the affidavit and power of attorney (section 70)
Customer pays lateClear credit terms and signed delivery documents

10. How can you adjust an existing pipeline within 30 days?

  • Write 5 to 7 pipeline stage definitions, with the evidence required at each
  • Calculate stage-to-stage conversion from the past 12 months of deals instead of using hypothetical figures
  • Add fields for decision-maker, budget range and timeframe before a quotation may be sent
  • Set the warning and closing thresholds for stale deals, and remove deals past them from the forecast
  • Create a loss-reason list and have salespeople choose from it every time a deal is lost
  • Split reporting into three layers: opportunity value, weighted close and monthly expected cash
  • Review the quotation template: validity, deposit, credit terms, delivery time and terms against the PO
  • Before closing a high-value deal, obtain the company affidavit and check the authorised signatory
  • Review each stage's probability every six or twelve months using real data
  • Hold a weekly pipeline meeting of no more than 30 minutes, focused on changes

If the forecast will go into a cash plan or business plan, build it together with a profit-and-loss and cash plan so the full year is visible.

Further reading

Count deals by the customer's evidence, not the salesperson's feeling; keep opportunity value, expected close and expected cash separate; and back the quotation, deposit, signatory and credit terms with clear documents.

We help Thai businesses draft and review quotations, terms of sale, sales contracts and deposit documents. For an initial consultation, call +66 92 254 2045 or send us the details. See also our contracts and documents and business plan preparation.


This guide is published by Suwanvara Law Firm — a Khon Kaen law firm established in 1986. General information only, not legal advice on a specific matter.

Frequently asked questions

We send many quotations but close few. Where should we fix first?+

Start by defining pipeline stages by evidence (section 2) and qualifying the decision-maker, budget and timing before you send a quotation (section 3). A quotation sent to someone with no buying authority or no budget is not a sales opportunity; it is just a document that binds you. Then look at stale deals and loss reasons (section 4) to see which stage leaks.

What probability should we use for each stage in a forecast?+

There is no universal figure that fits every business. The numbers in this guide are hypothetical examples. Calculate them from your own history: of the deals that were once at that stage, what share closed, over at least the last 12 months, and revisit once a year (sections 5 and 6).

If a quotation states a validity period, can we withdraw it before it ends?+

If the quotation amounts to an offer to contract and states a period for acceptance, section 354 of the Civil and Commercial Code treats the offer as irrevocable within that period. So do not state a validity longer than your costs and stock can bear. Some quotations may be mere invitations to deal, so the actual wording and circumstances matter (section 8).

The customer sent a PO that changes the quotation terms. Is the deal agreed?+

Not necessarily. Under section 359, second paragraph, an acceptance with additions, limitations or other modifications is treated as a rejection and a new offer at the same time. If we stay silent and start delivering, there may be an argument that we accepted the customer's terms. Confirm the terms in writing before work starts (section 8).

If a customer cancels, can we forfeit the deposit?+

Section 378 of the Civil and Commercial Code provides that, unless agreed otherwise, a deposit is forfeited if the party who paid it fails to perform, or if the contract is terminated through that party's fault. But the money must really have been given as a deposit (section 377). State clearly in the quotation and PO whether a payment is a deposit or an advance instalment, and check the facts case by case before forfeiting (section 9).

Who can sign a contract on behalf of the customer company?+

Section 70 of the Civil and Commercial Code provides that a juristic person acts through its representatives as set by law, its regulations or its constitutive instrument. In practice, obtain a recent company affidavit, check the authorised directors and signing conditions, and compare them with who actually signs (section 9).

Lawyer-client handshake symbolizing trust at Suwanvara Law Firm

Ready to hear your story

Get an initial consultation with one of our experienced attorneys.