Skip to main content
SUWANVARA LAWFIRM
Suwanvara Law Firm Co., Ltd.
SUWANVARA LAWFIRM
SUWANVARA LAWFIRM
Suwanvara Law Firm Co., Ltd.
Labor Law

Alcohol and Drug Testing in High-Risk Work in Thailand: How to Set the Policy and Protect the Data

A guide for factories, transport and hazardous-work businesses on which roles to test, when, with what reliable method, how to let employees explain, how to write the policy into work rules, and how to treat test results as health data under the PDPA, without assuming one positive result justifies immediate dismissal.

Suwanvara Law Firm— Employment & Corporate TeamNovember 21, 202616 min read
Alcohol and Drug Testing in High-Risk Work in Thailand: How to Set the Policy and Protect the Data

The core answer

An employer with risky work, such as a factory, transport, machinery operation or work in hazardous areas, may set up an alcohol or drug testing policy in some cases. A policy that works in practice answers five questions before any equipment is bought or any test is run: what safety risk is the testing meant to prevent, which roles are covered, when does testing happen, which method gives a reliable result, and how will the result, which is health data, be looked after.

One more point must be clear from the start: one positive preliminary result does not automatically justify dismissal. A screening result is the start of an inquiry, not a verdict. What follows depends on the work rules, the evidence, the role and the facts of the event. The employer should let the employee explain and choose a proportionate measure.

On data, an alcohol or drug test result is health information. The PDPA treats it as sensitive data, so it needs a suitable legal basis, advance notice to the employee, limited access, storage apart from the general file and a set retention period. This guide gives no blood alcohol figure and no legal drug threshold, because those numbers are set by specific laws and by testing specialists. Safety standards for each type of work should be set together with an occupational health and safety specialist.

The information in this guide is as of 21 November 2026. Laws and practice guidance may change, so check the official pages of the Personal Data Protection Committee Office and the Ministry of Labour before deciding.

Who this guide is for

Stage of the businessRead first
Planning (never tested, thinking of setting a policy)Sections 1, 2, 3, 5 and 6, then use the pre-launch checklist
Rolling out (informing staff, consulting representatives or a union, amending work rules)Sections 5, 6 and 8
Already testing (tests under way, positive results, refusals or disputes)Sections 3, 4, 7 and 8

1. What is the testing for, and which roles belong in the programme?

The starting point of the policy is a safety risk that actually arises from the work, not curiosity about what employees drink or use outside working hours. If you cannot say what kind of accident the testing prevents, it will be hard to justify to employees and to anyone who reviews it later.

Roles that more often have a rationale:

  • Driving: truck, delivery and passenger vehicle drivers, forklift and in-plant vehicle operators
  • Machinery and process control: presses, cutters, high-temperature furnaces, chemical systems
  • High-risk locations: work at height, confined spaces, high-voltage electrical work, construction, handling hazardous materials
  • Roles where a mistake endangers others: signallers, crane controllers, people responsible for the safety of others

Roles to think hard about before including: ordinary office work with no risk to life or property from being impaired. Testing every employee without grading the risk is easy for employees to challenge and risks breaching the personal data principle of collecting only what is necessary.

Question for each roleRecord worth keeping
If someone does this job impaired, what harm could result?The unit's risk assessment, or accident and near-miss reports
Is there a lighter measure that works as well, such as on-site supervision or shift planning?A note of why testing was chosen
Which roles are in the group and which are not?A list of roles, not a list of people

2. When to test: pre-shift, random, after an incident or on reasonable suspicion

The policy should state the "timing" of testing clearly, because each timing has its own rationale and its own cautions.

TimingUse whenCautions
Before a shift or before drivingRoles where an error is immediately dangerous, such as drivers and heavy machinery operatorsTest systematically and not where others see the result, with a private test area
Random, for defined roles onlyHigh-risk roles where deterrence is wantedUse a neutral selection method such as a randomiser, not a supervisor picking people on impulse; keep a record of the method
After an accident or near missTo investigate the causeTest promptly and test everyone involved equally; do not let the result replace looking for other causes such as faulty equipment or inadequate training
On reasonable suspicionObserved signs such as smell, unsteadiness or slurred speechUse at least two trained observers; record the facts observed, not conclusions like "drunk"
Before hire or before moving into a risky roleWhen the company has told the candidate in advanceAlso health data; needs a legal basis and a notice to candidates

For every timing, the policy should say who may order a test, who performs it, where and what is recorded. Leaving it to a supervisor's feeling is the most common weakness.

3. Method and reliability of the result

A good policy depends less on how much the equipment cost and more on how reliable and provable the result is when challenged. Points to settle in advance:

Screening versus confirmation

  • Screening is a quick preliminary test that can be done on site, such as a breath analyser or a rapid urine kit. A positive at this stage is only an indication.
  • Confirmation is a repeat test with a more specific method, in a laboratory or by suitable personnel. Where the result will be used for discipline, include this step or at least be able to explain why a screening result was enough for that event.

Equipment and testers

  • Use calibrated equipment on the schedule the manufacturer or a specialist recommends, and keep calibration records.
  • Testers should be trained in how to use it, not untrained supervisors, and there should be a check of the device before use.
  • Record the time, place, tester, device number and result on a form the person tested can see and sign.

Chain of custody. When a sample such as urine is collected, you must be able to show it belongs to that person and was not swapped or contaminated, for example by sealing it in front of the person, labelling with a code, signing across the seal and recording everyone who held it.

Retest. Give a right to ask for a retest, or to have a separately kept sample tested, within a set period, because alcohol and some substances in the body change over time.

Results that may be wrong. A screening result may be positive because of prescribed medicine, over-the-counter medicine, certain foods or products, or an equipment error. The policy therefore needs a route for the person to explain and for a specialist to interpret the result.

Numerical thresholds. This guide gives no alcohol value or drug threshold counted as positive, because these must be set on the advice of the equipment maker, the laboratory and specialists. Limits for driving on the road are set in traffic law; check with the Department of Land Transport or the traffic police and do not copy figures from unofficial sources into the policy.

4. Letting the employee explain, and prescribed medicine

Before a result is used against an employee, give them a real chance to explain through a written procedure.

  1. Tell them the result in private, not in front of others.
  2. Explain what it is: a screening result or a confirmed result.
  3. Ask whether there is prescribed medicine, over-the-counter medicine or a health condition that may be relevant, and leave room to declare it afterwards, for example by submitting a medical certificate within a deadline.
  4. Have the company's doctor or an occupational physician assess it, rather than HR guessing.
  5. While waiting, consider temporary non-hazardous duties instead of immediate suspension. If suspension is considered, see pay and paperwork in suspension during a disciplinary investigation.
  6. Record the explanation and any documents submitted.

Prescribed medicine is also health data. Have the employee tell a doctor or safety officer who keeps it confidential, so the supervisor does not need to know the drug or the illness. Pass on only a conclusion such as "fit for work", "fit with restrictions" or "should not do this role for now".

5. Writing it into the policy and work rules, and communicating it

A policy that is not written down and not communicated is hard to use to discipline anyone. Use three layers.

  1. Safety policy: purpose, covered roles, timing, method and data handling.
  2. Work rules: which acts are disciplinary offences, for example reporting for work under the influence of alcohol or a prohibited substance, refusing a test without reasonable cause, obstructing a test, and the penalty at each level. Work rules must be in writing and made known to employees; see the overview in work rules: which companies need them and what to do next.
  3. A privacy notice for testing: what data is collected, why, who has access and for how long.

How to communicate so it works

  • Hold briefings for every shift in language employees understand, including migrant workers where documents are translated.
  • Have employees sign to acknowledge, and hand out the document or post a notice.
  • Explain that the purpose is the safety of the people doing the work, not catching them out.
  • Give a channel for questions and complaints.
  • If there is a union or employee representatives, consult them before launch, because a policy employees helped shape tends to be accepted more readily.

If testing starts with existing staff, allow a transition period, announce a clear start date, and do not apply the policy retroactively to events before it existed.

6. Test results are health data: what the PDPA expects

An alcohol or drug test result says something about a person's health. The Personal Data Protection Act B.E. 2562 (PDPA) treats health information as sensitive data, which needs more care than ordinary data. In plain terms:

TopicWhat to do
Legal basisA basis valid for sensitive data is required, not merely "for the company's benefit". Have someone who knows the PDPA assess which basis fits each type of work; employee consent is often a fragile basis because of the imbalance of power
Collect only what is necessaryRecord "pass/fail" and what is needed, not health details unrelated to job safety
Minimum accessOnly the tester, the safety officer or doctor, and those who must decide discipline; not general supervisors or colleagues
Separate storageKeep in a file or system apart from the general personnel file, with passwords and an access log
Retention periodDecide in advance how long to keep and when to delete; delete clear results early and keep results that are disciplinary evidence only as long as the matter needs
Notice to employeesThe privacy notice states the purpose, data collected, recipients, retention period and employee rights
Sharing with third partiesIf a laboratory or testing provider handles data for the company, have a contract setting its data protection duties
SecurityProtect files and paper forms; do not send results in chat groups

The overall picture of employee data under the PDPA and the legal bases is in PDPA and employee data in HR. Biometric scanning, another kind of sensitive data, follows similar principles in face scan, fingerprint or GPS monitoring of employees.

7. One positive result: can the employee be dismissed right away?

It should not be assumed so. One positive screening result gives the employer reason to investigate further, but it does not answer how to punish. Factors to weigh together:

  • What the work rules say: whether it is a serious offence, whether warnings come first, and whether the employee acknowledged the rules
  • Evidence: screening or confirmed result, whether the device was calibrated, whether there are tester records and a chain of custody, whether witnesses observed signs
  • The role: a truck driver or hazardous machinery operator differs from an administrative employee
  • The facts: whether there was an accident, first or repeated occurrence, whether the employee has an explanation or prescribed medicine, whether it was during working hours
  • Treatment of others: how similar cases were handled, so that treatment is consistent

Proportionate measures can have several levels, such as moving off risky work temporarily, a confirmation test, a doctor's referral, an assistance programme, a warning and, in serious cases, a heavier penalty. Whether a dismissal is lawful under labour law and whether severance is payable depends on the cause and the facts case by case. See the overview in employee dismissal rights, and consult a lawyer before issuing a dismissal letter.

8. An employee who refuses to be tested

Refusal should be handled in the policy and procedure before any incident, not decided on the spot. A reasonable procedure:

  1. Explain the reason for testing and what the policy says about refusal.
  2. Ask the employee's reason; there may be a health, religious or misunderstanding issue that can be solved by explanation or a different method.
  3. Have at least one employer-side witness who is not the tester, and record the instruction and the answer.
  4. Do not use physical force and do not humiliate the person in front of others.
  5. Move the employee off hazardous work temporarily as safety requires, but watch pay and employment conditions.
  6. Consider discipline under rules applied equally to everyone.

Whether refusal is a disciplinary offence depends on whether the policy is lawful, clearly communicated, genuinely related to job safety and the instruction reasonable. Do not write into the policy that "refusal means immediate dismissal" without checking with a lawyer.

9. Documents and pre-launch checklist

Documents to prepare

#DocumentMain content
1Alcohol and drug testing policyPurpose, roles, timing, method, who may order a test
2Amended work rulesOffences, penalties, procedure, refusal to test
3Privacy notice for testingData collected, who has access, retention, employee rights
4Procedure (SOP)Test sequence, confirmation, retest, chain of custody
5Result record and observation formTime, place, tester, device, result, witnesses
6Employee explanation formExplanation, prescribed medicine, attachments
7Contract with laboratory or providerTest standards, confidentiality, data deletion
8Employee acknowledgement recordBriefing dates, signatures

Pre-launch checklist

  • Assess the work risk and include only roles with a safety rationale
  • Set the timing of tests and a neutral random selection method
  • Choose screening and confirmation methods with calibrated equipment
  • Train testers and observers
  • Write the explanation, prescribed medicine and retest procedure
  • Amend and announce the work rules
  • Prepare the privacy notice, set who has access, separate storage and the deletion period
  • Write the procedure for refusal to test
  • Brief every shift and collect signed acknowledgements
  • Have an occupational health and safety specialist review the standards for each type of work
  • Pilot it and review the policy after a period

Hypothetical example: a packaging plant sets a pre-shift testing policy

(A hypothetical to illustrate the principles, not a real case. Numbers are illustrative only.)

A hypothetical company has 150 employees. There were two near-miss forklift incidents in the warehouse during the year. A manager wants everyone breath-tested every morning.

HR and the safety officer proceed as follows.

  1. Risk assessment. The high-risk jobs are forklift drivers, press operators and delivery drivers, not accounting or office staff.
  2. Group. Pre-shift testing for those three groups only, plus a monthly random test chosen by a randomiser, not by supervisors.
  3. Method. A calibrated breath analyser on a schedule, a trained tester, a small private room. If the screening is positive, retest and send for confirmation under the procedure.
  4. Explanation. One employee shows a slightly positive screening in the morning. He says he takes a liquid medicine prescribed by a doctor. The safety unit takes him off forklift duty temporarily and refers him to a doctor, who gives a conclusion on fitness for work. His supervisor receives only the conclusion and never sees the medicine name.
  5. Data. The record is kept in a separate file open only to the safety unit and HR. Clear results are deleted on the set schedule.
  6. Discipline. The company takes no disciplinary action because the facts support the explanation, and reminds everyone to declare their medicine in advance.
  7. A different outcome. Had the confirmation been positive and a collision occurred while driving the forklift, the company would decide under the work rules and all the evidence, without dismissing automatically on the test result alone.

Misunderstandings

Common beliefWhat to know
"One positive result means we can dismiss immediately"A screening result starts an inquiry. The outcome depends on the work rules, evidence, role and facts, and a dismissal must be lawful under labour law case by case
"Test everyone in every role, just to be safe"Testing must be tied to the risk of the work. Testing wider than necessary invites disputes on proportionality and under the PDPA
"A cheap breath analyser is enough"Reliability depends on calibration, trained testers, records and confirmation testing, not on the price of the device
"Test results are company business, anyone in the department can see them"It is health data. Limit access, store separately and state the retention period
"The employee signed the policy, so we can do anything with the results"Acknowledgement is not a blanket licence. You still need a PDPA basis, use of data only for the stated purpose and discipline by procedure
"Refusing a test means guilty"Check whether the policy is lawful, clearly communicated, the instruction reasonable, and the employee has had a chance to explain
"We can always use the traffic-law alcohol figure as the internal limit"The traffic-law limit serves a specific purpose; internal thresholds should be set by specialists according to the risk of the work

Limits of this guide. This guide gives general approaches for private employers. It does not cover work where a specific law prescribes testing, such as some transport or aviation operations, which may have rules from a regulator. It gives no medical figures or legal thresholds, is not medical advice, and does not replace safety standards that an occupational health and safety specialist must set. If the facts change, for example an accident, an injury or a dispute, the answer may change.

Further reading

A workable alcohol and drug testing policy is tied to the real risk of the job, uses reliable methods and lets the employee explain, is written into the work rules and communicated in advance, treats test results as health data, and does not treat one screening result as grounds for immediate dismissal.

We help draft the testing policy, amended work rules, privacy notice, record and explanation forms, and check that the policy is consistent with the PDPA. We are not occupational health specialists, doctors or a testing laboratory, and we cannot promise the outcome of any dispute. Fees depend on the stage of the matter and the work needed. Send us your documents first, and we will give you the scope of work and fees in writing before starting. Call +66 92 254 2045 or send us the details. See also HR documents and PDPA compliance.


This guide is published by Suwanvara Law Firm — a Khon Kaen law firm established in 1986. General information only, not legal advice on a specific matter.

Frequently asked questions

Can an employer test employees for alcohol or drugs?+

In some cases, yes, but the testing should be tied to a real safety risk of the job, such as driving, operating machinery, working at height or in hazardous areas, and written into a policy employees are told about in advance. Testing everyone in every role without a reason invites disputes on proportionality and on personal data. The final answer depends on the nature of the work, the work rules and the testing method used.

Can an employee be dismissed immediately after one positive screening result?+

It should not be assumed so. A screening result is only a preliminary indication. Consider how reliable the method is, whether a confirmation test was done, whether the employee has prescribed medicine or another explanation, what the work rules say, how risky the role is and the facts of the event, then choose a proportionate measure. Whether a dismissal is lawful has to be judged case by case under labour law.

What kind of personal data is an alcohol or drug test result?+

It is health information, which the PDPA treats as sensitive data. It needs a valid legal basis, advance notice to the employee, access limited to those who need it, storage separate from the general personnel file, and a clear retention and deletion period. It should not be shown to supervisors or colleagues who have no need to know.

If an employee refuses to be tested, can the employer discipline them?+

Handle it through a policy and procedure written before any incident: explain the reason, give the employee a chance to respond, record the instruction and answer, and consider discipline under work rules that apply equally to everyone. Do not use physical force or humiliate the person in front of others. Whether refusal is a disciplinary offence depends on whether the policy is lawful, clearly communicated and the instruction reasonable.

What if an employee on prescribed medicine tests positive?+

Some medicines can cause a positive screening result or drowsiness. A good policy lets employees declare prescribed medicine in advance or explain afterwards, with a doctor or occupational physician assessing it and the medicine details kept confidential from line managers.

What is the legal blood alcohol limit for drivers?+

Limits for driving on the road are set by traffic law and notifications of the relevant authorities, which can change and differ by type of driver. This guide therefore gives no figure. Check with the Department of Land Transport or the traffic police, and set any internal company threshold separately according to the risk of the work.

Lawyer-client handshake symbolizing trust at Suwanvara Law Firm

Ready to hear your story

Get an initial consultation with one of our experienced attorneys.